Departamento Académico de Ingeniería

Permanent URI for this communityhttp://54.81.141.168/handle/123456789/124167

Browse

Author: search.filters.author.Spacone, Enrico

Search Results

Now showing 1 - 4 of 4
  • Thumbnail Image
    ItemOpen Access
    Alternative approach for reproducing the in-plane behaviour of rubble stone walls
    (2017) Tarque, Nicola; Camata, Guido; Benedetti, Andrea; Spacone, Enrico
    Stone masonry is one of the oldest construction types due to the natural and free availability of stones and the relatively easy construction. Since stone masonry is brittle, it is also very vulnerable and in the case of earthquakes damage, collapses and causalities are very likely to occur, as it has been seen during the last Italian earthquake in Amatrice in 2016. In the recent years, some researchers have performed experimental tests to improve the knowledge of the behaviour of stone masonry. Concurrently, there is the need to reproduce the seismic behaviour of these structures by numerical approaches, also in consideration of the high cost of experimental tests. In this work, an alternative simplified procedure to numerically reproduce the diagonal compression and shear compression tests on a rubble stone masonry is proposed within the finite element method. The proposed procedure represents the stone units as rigid bodies and the mortar as a plastic material with compression and tension inelastic behaviour calibrated based on parametric studies. The validation of the proposed model was verified by comparison with experimental data. The advantage of this simplified methodology is the use of a limited number of degrees of freedom which allows the reduction of the computational time, which leaves the possibility to carry out parametric studies that consider different wall configurations.
  • Thumbnail Image
    ItemOpen Access
    Masonry infilled frame structures: state-of-the-art review of numerical modelling
    (2015) Tarque, Nicola; Candido, Leandro; Camata, Guido; Spacone, Enrico
    This paper presents a state-of-the-art review of the nonlinear modelling techniques available today for describing the structural behaviour of masonry infills and their interaction with frame structures subjected to in-plane loads. Following brief overviews on the behaviour of masonry-infilled frames and on the results of salient experimental tests, three modelling approaches are discussed in more detail: the micro, the meso and the macro approaches. The first model considers each of the infilled frame elements as separate: brick units, mortar, concrete and steel reinforcement; while the second approach treats the masonry infill as a continuum. The paper focuses on the third approach, which combines frame elements for the beams and columns with one or more equivalent struts for the infill panel. Due to its relative simplicity and computational speed, the macro model technique is more widely used today, though not all proposed models capture the main effects of the frame-infill interaction.
  • Thumbnail Image
    ItemOpen Access
    Nonlinear Dynamic Analysis of a Full-Scale Unreinforced Adobe Model
    (2014) Tarque, Nicola; Camata, Guido; Spacone, Enrico; Varum, Humberto; Blondet, Marcial
    This paper describes the results of a numerical study of a full-scale adobe building model tested on a shaking table. Material properties of adobe masonry were calibrated to represent the wall in-plane seismic behavior, based on a prior numerical analysis of an adobe wall carried out by the authors. The inelastic part of the constitutive model was represented by a softening curve in tension and by a hardening/softening behavior in compression; thus, the fracture energy is a key issue in the modeling process. A finite element model that relies on a homogenous continuum approach was developed in Abaqus/Explicit software. The damage evolution in the numerical simulation represented fairly well the experimental crack pattern, for in-plane and out-of-plane seismic effects. Overall, the calibrated material properties and the explicit solution scheme proved to be appropriate for simulating the seismic behavior and predicting capacity of unreinforced adobe structures subjected to seismic loading.
  • Thumbnail Image
    ItemOpen Access
    Numerical simulation of an adobe wall under in-plane loading
    (2014) Tarque, Nicola; Camata, Guido; Varum, Humberto; Spacone, Enrico; Blondet, Marcial
    Adobe is one of the oldest construction materials that is still used in many seismic countries, and different construction techniques are found around the world. The adobe material is characterized as a brittle material; it has acceptable compression strength but it has poor performance under tensile and shear loading conditions. Numerical modelling is an alternative approach for studying the nonlinear behaviour of masonry structures such as adobe. The lack of a comprehensive experimental database on the adobe material properties motivated the study developed here. A set of a reference material parameters for the adobe were obtained from a calibration of numerical models based on a quasi-static cyclic in-plane test on full-scale adobe wall representative of the typical Peruvian adobe constructions. The numerical modelling, within the micro and macro modelling approach, lead to a good prediction of the in-plane seismic capacity and of the damage evolution in the adobe wall considered.