Show simple item record

dc.contributor.advisorRivera Campos, Richard Alberto
dc.contributor.authorCórdova Córdova, Luis Francisco
dc.date.accessioned2024-06-05T18:02:10Z
dc.date.accessioned2024-06-09T05:12:46Z
dc.date.available2024-06-05T18:02:10Z
dc.date.available2024-06-09T05:12:46Z
dc.date.created2024
dc.date.issued2024-06-05
dc.identifier.urihttp://hdl.handle.net/20.500.12404/27989
dc.description.abstractEl objetivo general de esta tesis es estudiar teórica y experimentalmente el comportamiento dinámico de una estructura articulada construida a partir de elementos viga y barra que es utilizada como modelo simplificado de un ala articulada de una aeronave subsónica y cuya geometría es modificada mediante un sistema propuesto de actuación análogo al hallado en una articulación del dedo humano. Inspirado en los sistemas de extensión y flexión del dedo humano, el sistema propuesto de actuación consiste en el uso de cables tensores a modo de tendones artificiales para modificar la rigidez y permitir el cambio geométrico de la estructura estudiada. Al permitir que alas articuladas adapten una posición óptima durante todas las fases de vuelo, este sistema de actuación generaría operaciones más eficientes y una menor huella de carbono que las alas rígidas, las cuales están normalmente diseñadas para tener un desempeño óptimo sólo en el rango de velocidad crucero. Para estudiar el comportamiento dinámico de la estructura articulada con tendones artificiales, se desarrollaron tres modelos matemáticos y se formularon sus ecuaciones de movimiento. Asimismo, se construyó un modelo experimental y se diseñó tres grupos de experimentos para evaluar los efectos de las variaciones de tensión y geometría sobre las frecuencias naturales de la estructura. A partir de la comparación de resultados teóricos y experimentales, se concluyó que los modelos matemáticos propuestos son adecuados para predecir el comportamiento dinámico de la estructura articulada con tendones artificiales, y que las modificaciones de tensión y geometría reconfiguran las frecuencias naturales del sistema dinámico.es_ES
dc.description.abstractThe objective of this thesis is to study theoretically and experimentally the dynamic response of an articulated structure based on beam and bar elements that is used as a simplified model of an articulated subsonic aircraft wing, and whose geometry is modified through a proposed actuation system analogous to the one found in an articulation of the human finger. Inspired in the extension and flexion systems of the human finger, the proposed actuation system consists of tensioning cables that work as artificial tendons to modify both stiffness and geometry of the structure in study. By enabling articulated wings to adapt an optimal position during all flight phases, the proposed actuation system would generate more efficient operations and a smaller carbon footprint than rigid wings, which are typically designed to perform optimally at cruise only. To study the dynamic response of an articulated structure with artificial tendons, three mathematical models were developed, and their equations of motion were formulated. Additionally, an experimental model was built, and three groups of experiments were designed to evaluate the effects of the variation in tension and wing position (extension/flexion) upon the natural frequencies of the structure. Based on the assessment of theoretical and experimental results, it was concluded that the mathematical models proposed for the articulated structure actuated with artificial tendons are adequate to predict the dynamic response of the structure, and that variations in tension and wing position (extension/flexion) reconfigure the natural frequencies of the dynamic system.es_ES
dc.language.isospaes_ES
dc.publisherPontificia Universidad Católica del Perúes_ES
dc.rightsinfo:eu-repo/semantics/openAccesses_ES
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/2.5/pe/*
dc.subjectManipuladores (Mecanismos)--Diseño y construcciónes_ES
dc.subjectSistemas dinámicos diferencialeses_ES
dc.subjectAeronaveses_ES
dc.titleEstudio teórico y experimental del comportamiento dinámico de una estructura articulada cuya geometría es modificada por elementos tensores en forma análoga a una articulación del dedo humano, sistema aplicado al desarrollo potencial de elementos alares de aeronaves subsónicases_ES
dc.typeinfo:eu-repo/semantics/masterThesises_ES
thesis.degree.nameMaestro en Ingeniería Mecánicaes_ES
thesis.degree.levelMaestríaes_ES
thesis.degree.grantorPontificia Universidad Católica del Perú. Escuela de Posgrado.es_ES
thesis.degree.disciplineIngeniería Mecánicaes_ES
dc.type.otherTesis de maestría
dc.subject.ocdehttps://purl.org/pe-repo/ocde/ford#2.03.01es_ES
dc.publisher.countryPEes_ES
renati.advisor.dni18099258
renati.advisor.orcidhttps://orcid.org/0000-0003-3368-6419es_ES
renati.author.dni46641763
renati.discipline713347es_ES
renati.jurorAlencastre Miranda, Jorge Hernanes_ES
renati.jurorRivera Campos, Richard Albertoes_ES
renati.jurorLavayen Farfan, Danieles_ES
renati.levelhttps://purl.org/pe-repo/renati/level#maestroes_ES
renati.typehttps://purl.org/pe-repo/renati/type#tesises_ES


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record

info:eu-repo/semantics/openAccess
Except where otherwise noted, this item's license is described as info:eu-repo/semantics/openAccess