Show simple item record

dc.contributor.advisorWulff, Kai
dc.contributor.advisorMoran Cardenas, Antonio
dc.contributor.authorSaenz Acuña, Johnny Henry
dc.date.accessioned2017-11-04T01:05:17Z
dc.date.available2017-11-04T01:05:17Z
dc.date.created2017-11-04T01:05:17Z
dc.date.issued2017-11-04
dc.identifier.urihttp://hdl.handle.net/20.500.12404/9644
dc.description.abstractThis thesis presents the modeling and control of a quadcopter vehicle and the application of adaptive backstepping for attitude stabilization. This nonlinear technique has been chosen because they can explicitly address the specific nonlinear dynamics of the plant. The objectives are to derive, validate, simulate and implement this Backstepping controller with a suitable quadcopter model. First a modeling process was conducted using the Newton-Euler formalism together with Euler angles to parameterize the rotations. The subsequently proposed approach consists on the nominal backstepping attitude controller which regulates the pitch , roll and yaw rotations and the adaptive scheme which estimates the external disturbances. Simulations showed satisfying performance in attitude stabilization under uncertainties of up to 50% in inertia matrix and constant external disturbances. Finally the controller is implemented in the real platform based on Odroid single board computer and it showed an overall performance with room to further improvements. Then this work proves that the proposed controller can be successfully implemented.
dc.language.isoeng
dc.publisherPontificia Universidad Católica del Perú
dc.rightsinfo:eu-repo/semantics/restrictedAccess
dc.sourcePontificia Universidad Católica del Perú
dc.sourceRepositorio de Tesis - PUCP
dc.subjectControladores programables--Diseño y construcción
dc.subjectHelicópteros--Control robusto
dc.titleStudies on nonlinear robust tracking control for a quadcopter system
dc.typeinfo:eu-repo/semantics/masterThesis
thesis.degree.nameMagíster en Ingeniería de Control y Automatizaciónes_ES
thesis.degree.levelMaestríaes_ES
thesis.degree.grantorPontificia Universidad Católica del Perú. Escuela de Posgradoes_ES
thesis.degree.disciplineIngeniería de Control y Automatizaciónes_ES
dc.type.otherTesis de maestría
dc.publisher.countryPE
renati.discipline712037es_ES
renati.levelhttps://purl.org/pe-repo/renati/level#maestroes_ES
renati.typehttp://purl.org/pe-repo/renati/type#tesises_ES


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record