Procesamiento de Señales e Imágenes Digitales
URI permanente para esta colecciónhttp://54.81.141.168/handle/123456789/31440
Explorar
2 resultados
Resultados de Búsqueda
Ítem Texto completo enlazado Characterization of healthy skin with high-frequency ultrasound using quantitative ultrasound(Pontificia Universidad Católica del Perú, 2018-08-20) Saavedra Bazán, Ana Cecilia; Castañeda Aphan, BenjamínThe skin is the largest organ of the body that protects it from the external environment. High- frequency ultra sound (HF-US) has been used to visualize the skin in depth and to diagnose some pathologies in dermatological applications. Quantitative ultrasound (QUS) includes several techniques that provide values of particular physical properties. In this thesis work, three QUS parameters are explained and used to characterize healthy skin through HF-US: attenuation coefficient slope (ACS), backscatter coefficient (BSC) and shear wave speed (SWS). They were estimated with the regularized spectral-log difference (RSLD) method, the reference phan- tom method, and the crawling wave sonoelastography method, respectively. All the three parameters were assessed in phantoms, ex vivo and in vivo skin. In calibrated phantoms, RSLD showed a reduc- tion of up to 93% of the standard deviation concerning the estimation with SLD, and BSC showed an agreement with the Faran’s theoretical curve. In gelatin-based phantoms, surface acoustic waves (SAWs) were estimated in two interfaces: solid-water and solid-US gel, which all owed corroborating SAWs presence and finding an empirical compensation factor when the coupling interface is US gel. A correction factor of 0:97 for SAW-to-shear was found to avoid underestimation in phantoms. Porcine thigh was calculated in the range from 8 to 27 MHz, where the ACS was 4:08 _+_0:43 dB cm -1 MHz-1 and BSC was in the range from 10 1 to 10° sr-1 _cm-1. Crawling wave sonoelastography method was applied for the vibration frequencies between 200 Hz and 800 Hz, where SWS was in the range from 4:6 m/sto9:1 m/s. In vivo ACS and BSC were assessed in the healthy forearm and thigh, whereas SWS only in the thigh. The average ACS in the forearm dermis was 2.07dB cm-1 _MHz-1, which is in close agreement with the literature. A significant difference (p < 0.05) was found between the ACS in the forearm dermis and the thigh dermis (average ACS of 2.54dB cm-1 _MHz-1). The BSC of the forearm and thigh dermis were in the range from 10 -1 to 10° sr-1 _cm-1, and in the range from 10-1 to 10° sr-1 _cm-1, respectively. The SWS in the thigh dermis was 2:4 _+_0:38 m/s for a vibration frequency of 200Hz, with an increasing trend as frequency increases. Results suggest that these QUS parameters have the potential to be used as a tool for in vivo skin characterization and show potential for future application in skin lesions.Ítem Texto completo enlazado 3D updating of solid models based on local geometrical meshes applied to the reconstruction of ancient monumental structures(Pontificia Universidad Católica del Perú, 2014-10-14) Zvietcovich Zegarra, José Fernando; Castañeda Aphan, Benjamín; Perucchio, RenatoWe introduce a novel methodology for locally updating an existing 3D solid model of a complex monumental structure with the geometric information provided by a 3D mesh (point cloud) extracted from the digital survey of a specific sector of a monument. Solid models are fundamental for engineering analysis and conservation of monumental structures of the cultural heritage. Finite elements analysis (FEA), the most versatile and commonly used tool for the numerical simulation of the static and dynamic response of large structures, requires 3D solids which accurately represent the outside as well as the inside geometry and topology of the domain to be analyzed. However, the structural changes introduced during the lifetime of the monument and the damage caused by anthropogenic and natural factors contribute to producing complex geometrical configurations that may not be generated with the desired accuracy in standard CAD solid modeling software. On the other hand, the development of digital techniques for surveying historical buildings and cultural monuments, such as laser scanning and photogrammetric reconstruction, has made possible the creation of accurate 3D mesh models describing the geometry of those structures for multiple applications in heritage documentation, preservation, and archaeological interpretations. The proposed methodology consists of a series of procedures which utilize image processing, computer vision, and computational geometry algorithms operating on entities defined in the Solid Modeling space and the Mesh space. The operand solid model is defined as the existing solid model to be updated. The 3D mesh model containing new surface information is first aligned to the operand solid model via 3D registration and, subsequently, segmented and converted to a provisional solid model incorporating the features to be added or subtracted. Finally, provisional and operand models are combined and data is transferred through regularized Boolean operations performed in a standard CAD environment. We test the procedure on the Main Platform of the Huaca de la Luna, Trujillo, Peru, one of the most important massive earthen structures of the Moche civilization. Solid models are defined in AutoCAD while 3D meshes are recorded with a Faro Focus laser scanner. The results indicate that the proposed methodology is effective at transferring complex geometrical and topological features from the mesh to the solid modeling space. The methodology preserves, as much as possible, the initial accuracy of meshes on the geometry of the resultant solid model which would be highly difficult and time consuming using manual approaches.